opet Lubricants

related products

FULLTECH 0W-16 FULLTECH 0W-16
FULLTECH 0W-20 FULLTECH 0W-20
FULLTECH 0W-30 FULLTECH 0W-30
FULLTECH 0W-40 FULLTECH 0W-40
FULLTECH LD 5W-40 FULLTECH LD 5W-40
FULLMAX FD 0W-20 FULLMAX FD 0W-20
FULLMAX TF-DM1 0W-20 FULLMAX TF-DM1 0W-20
FULLTECH 5W-30 FULLTECH 5W-30
FULLTECH 10W-60 FULLTECH 10W-60
FULLMAX 0W-20 FULLMAX 0W-20
FULLMAX 0W-30 FULLMAX 0W-30
FULLMAX TF-B 0W-30 FULLMAX TF-B 0W-30
FULLMAX TF-D 0W-30 FULLMAX TF-D 0W-30
FULLMAX TF-BD 5W-30 FULLMAX TF-BD 5W-30
FULLMAX RN 5W-30 FULLMAX RN 5W-30
FULLMAX LE 5W-30 FULLMAX LE 5W-30
FULLMAX 5W-30 FULLMAX 5W-30
FULLMAX 5W-40 FULLMAX 5W-40
FULLMAX LPG 5W-40 FULLMAX LPG 5W-40
FULLMAX 10W-30 FULLMAX 10W-30
FULLMAX 10W-40 FULLMAX 10W-40
FULLMAX LPG 10W-40 FULLMAX LPG 10W-40
FULLMAX DIESEL 10W-40 FULLMAX DIESEL 10W-40
FULLLIFE DPF 5W-30 FULLLIFE DPF 5W-30
FULLLIFE 5W-30 FULLLIFE 5W-30
FULLLIFE LPG 5W-30 FULLLIFE LPG 5W-30
FULLLIFE S 10W-40 FULLLIFE S 10W-40
FULLLIFE 15W-40 FULLLIFE 15W-40
FULLLIFE 20W-50 FULLLIFE 20W-50
FULLLIFE LPG 20W-50 FULLLIFE LPG 20W-50
FULLLIFE XP 20W-50 FULLLIFE XP 20W-50
FULLMASTER 10W-30 FULLMASTER 10W-30

Technical support

Engine Oils
As a general principle, mixing of oils with different properties and different brands is not appropriate. However, the decrease in oil was a variety of reasons and if it is necessary to complete the same viscosity and quality class can be added with other brand oils. It is recommended that the oil is completely drained and replaced with new oil at the most convenient time after the addition with another brand of oil. Hydraulic brake fluid at the same quality level can be mixed with each other regardless of brand.
One of the duties of engine oil is to keep systems clean. A qualified engine oil incorporates soot particles in engine after separating them and prevent them from sticking on metal surfaces due to the detergent-dispersant additives in its content. It cleans soot particles adherent on metal surfaces with cleaning agent. Therefore, engine oil becomes dirty and its color turns black. If the motor oil is dirty, it is doing its job well.
0W, expresses the viscosity grade of the engine oil. 'W' comes from the word 'winter'. '0' shows the cold working conditions of the engine oil. The kinematic viscosity of a 0W engine oil at 100 °C is at least 3.8 cST, which is pumpable even at -40 °C.
Gear Oils
The Association of Automotive Engineers (SAE) classifies automotive gear oils according to their kinematic viscosity values ​​at 100 °C and their pumpability at low temperatures. For example, the SAE 80W-90 in an automotive gear oil '90' describes the kinematic viscosity of this gear oil at 100 °C. As this number increases oil thickens, if the number decreases oil thins. The kinematic viscosity of '90' gear oil at 100 °C is between 13.50 and 18.50 cST while the kinematic viscosity of '140' gear oil at 100 °C must be between 24.00 and 32.50 cST. The number to the left of W (Winter) determines the performance of gear oil at low temperatures. Pumping temperature of '80W' gear oil is -26 °C while pumping temperature of '75W' gear oil is -40 °C.
It is the API classification used for gear oils. Oil that contains additives to balance excessive pressure and pulsed load for hypoid gear type differentials running under heavy conditions and that fulfills MIL-L-2105 specifications. In GL-5, there are more overpressure additives and it is generally used under heavy work conditions. Unless otherwise specified, GL-5 should not be used in places where GL-4 is recommended. Because the sulphide in overpressure additive which is present excessively in GL-5 corrodes yellow metals.
Synthetic based oils are oils produced with chemical methods. They are produced to lubricate in applications where traditionally obtained mineral oils cannot be sufficient. Synthetic-based oils provide superior protection at higher temperatures than minerals, easier flow and pumpability at low temperatures , more stable film strength under extreme pressure and longer drain interval in difficult operating conditions.
Engine Oils
Viscosity is the resistance of fluids against flowing. An oil film is formed between the two surfaces under pressure with viscosity and system parts are provided to work for long years without abrasion.
The aim of lubrication is to decrease friction by separating two surfaces, to ease movement by lubricating surfaces, to make cooling, to minimize wear and to avoid corrosion by generating film on the surface.
The information on the oil packaging contains important clues about performance of the oil. There should be information about five issues on the packaging in general. These; brand, its contents (be mineral, synthetic or synthetic based), viscosity grade (such as 5W-30, 10W-40), international performances (such as API CK-4, ACEA C3), OEM performances (such as MB-Approval 228.51, Volvo VDS- 4, VW 504 00/507 00).
Grease
With manual hand pump or air pump can be printed directly into the bearing. In systems with central automatic lubrication, the grease is filled into the central chamber, the pneumatic system greases the greasing points automatically with the specified intervals.
In terms of application of lubricating with oil where it is not possible to use grease especially in ball bearings.
Greases may leak during storage and base oil also tends to oscillate. The oil leakage rate will increase over time and will vary depending on the storage temperature. The grease should ideally be stored in a cool, dry interior and the ambient temperature should not exceed 30 °C and should not be less than 0 °C. The grease must be protected from dust, dirt, moisture or rainwater, and from direct sunlight.
ALL QUESTIONS